Ricoh Aficio SP 1000SF Manuel d'utilisateur télécharger pdf (Page 19)

SP 1000SF

- 16 -

2 - Installation

(3) Paper with waved ends, paper which is creased, paper

with crumples, and any other non-normal paper must

not be used.

Handling the unit

Operator shocks

During printing, shocks must not be applied to the paper

feed cassette, tray, cover, and other parts of the machine.

Moving the unit

When moving the unit on a desk, it must be lifted, and not

dragged.

Handling the Toner Cartridge

(1) Must not be stood on the side, or held upside down.

(2) Must not be shaken strongly.

Feed cassette paper insertion

Your device accepts a number of formats and types of

papers.

1 Remove the paper feed cassette completely.

2 Push the lower panel down until it clicks.

3 Setup the back side feed cassette stop by pushing

the "PUSH" lever (A).

Then adjust the lateral paper guides to the paper

format by pushing lever (B) located on the left

guide. Adjust the length paper guide to the paper

format by pushing lever (C).

4 Take a paper stack, pull the paper off and align it

on a flat surface.

5 Put the paper stack in the feed cassette

(200 sheets for 80 g/m² paper for instance).

6 Put the feed cassette back in its location.

Cartridge installation

1 Stand in front of the machine.

2 Push the left and right sides of the cover and pull it

at the same time towards you.

3 Remove the starter toner cartridge from its bag.

Gently roll the cartridge 5 or 6 times to distribute the

toner evenly inside the cartridge.

Thoroughly rolling the cartridge will assure the

maximum copies per cartridge.

Important

See chapter Specifications for the

various formats and types of paper.

PUSH

7¼5½

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

Ricoh Aficio SP 1000SF Manuel d'utilisateur Page 19

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Ricoh Aficio SP 1000SF