Ricoh Aficio SP 1000SF Manuel d'utilisateur télécharger pdf (Page 21)

SP 1000SF

- 18 -

2 - Installation

Paper insertion in the manual input

tray

The manual input tray allows you to use various paper

formats with greater weightings than the one used in the

paper feed cassette.

Only one sheet or envelope can be fed at a time.

1 Spread the manual feed guides to the maximum.

2 Insert a sheet or an envelope in the manual input

tray.

3 Adjust the paper guides against the right and left

edges of the sheet or the envelope.

4 Print making sure that the chosen paper format

corresponds to the selected format on the printer.

Note: When using envelopes

• Feeding can be done only through the manual feed.

• Recommended area should be the area which

excludes 15 mm from the leading edge, 10 mm from

and both the left and right edges, and the rear edge.

• A few crinkled lines may be given in solid print at the

part of being overlapped.

• Envelopes which are not recommended may lead to

improper printing.

• Curled envelope after printing should be fixed

manually.

• Small crumples on the edge of the wide side of

envelopes. Smearing, or less clear printing may

appear on the reverse side.

• Set envelope by pressing the folding line of four edges

properly after releasing air inside.

• Set envelope in a proper position after aligning in case

it is bent or warped.

• Paper conditioning is not allowed. And it should be

used under normal office environment.

Important

See chapter Specifications for the

various formats and types of paper.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 58 59

Pas de commentaire

Ricoh Aficio SP 1000SF Manuel d'utilisateur Page 21