Ricoh Aficio MP 161F Guide d'installation Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 122
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
Using NetWare
17
1
Using NetWare
This section describes the setting pro-
cedure for network printers in the
NetWare environment. In the Net-
Ware environment, you can connect
the machine as a “print server” or “re-
mote printer”.
Important
IPv6 cannot be used on this func-
tion.
Setting procedure
When using the machine as a
print server
A Installing SmartDeviceMon-
itor for Admin
B Setting the network interface
board.
C Turning the machine off and
then back on.
When using the machine as a
remote printer
A Installing SmartDeviceMoni-
tor for Admin.
B Setting the network interface
board.
C Setting NetWare.
D Starting the print server.
Note
This procedure assumes an envi-
ronment is already prepared for
normal NetWare running the
printing service setting.
The procedure is explained with
the following example settings:
File server’s name …CAREE
Print server’s name …PSERV
•Printers nameR-PRN
Queue name …R-QUEUE
Using SmartDeviceMonitor for Admin
To use the machine in a NetWare
environment, use SmartDevice-
Monitor for Admin to set the Net-
Ware printing environment.
Note
The NetWare Client provided
by Novell is required to set the
printing environment using
SmartDeviceMonitor for Ad-
min under the following envi-
ronments:
NDS mode in Windows 95/
98/Me
NDS or Bindery mode in Win-
dows
2000/XP, Windows NT
4.0
Reference
p.35 “Installing SmartDevice-
Monitor for Admin”
Printers listed by SmartDeviceMoni-
tor for Admin
SmartDeviceMonitor for Admin
lists printers connected to the net-
work. If you cannot identify the
machine you want to configure,
print configuration page, and then
check the machine name.
Setting Up as a Print Server
(NetWare 3.x)
Follow the procedure below to con-
nect the machine as a print server us-
ing NetWare 3.x.
A Log on to the file server as a su-
pervisor or supervisor equivalent.
B Start NIB Setup Tool from the
[Start] menu.
C Click [Wizard], and then click [OK].
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 121 122

Commentaires sur ces manuels

Pas de commentaire