Ricoh AP505 Instructions d'exploitation télécharger pdf (Page 34)

Operating Instructions

Removing Misfed Paper from the Bypass Tray

Follow the instructions below to remove the misfed paper from the bypass tray.

To remove misfed paper from the bypass tray

1 Carefully pull out the misfed paper making sure that you do not leave any misfed

paper in the printer.

2 When paper is left in the bypass tray, remove the paper.

3 Close the bypass tray, open the front cover, and then close it to reset the misfeed

condition.

4 Reload paper into the bypass tray.

Removing Misfed Paper from the Front Cover

Follow the instructions below when removing misfed paper from the front cover:

Warning: When removing misfed paper, do not touch the fusing section. It

is very hot and could cause burns.

To remove misfed paper from the front cover

1 If the message OPEN FRONT COVER AND REMOVE MISFEED appears on

the display panel, open the front cover by pushing the front cover release button.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Pas de commentaire

Ricoh AP505 Instructions d'exploitation Page 34