Ricoh AP505 Instructions d'exploitation télécharger pdf (Page 16)

Operating Instructions

Installing the Memory Unit Type 505 (DIMM)

Follow the instructions below to install the memory unit:

Warning: Make sure to turn off the printer and wait for about 30 minutes before

installing options. Not waiting for the printer to cool down can result

in burns.

1 Turn off the printer’s power switch and remove all cables and cords from the

printer.

2 Remove the screws and remove the back plate as shown in the diagram below.

Note: A coin can be used to remove the screws.

Caution:

The memory unit is sensitive to electrostatic discharge which may cause

permanent damage to the unit. Be sure to wear and electrostatic discharge (ESD)

grounded wrist-strap when handling the memory unit.

3 Open the white tabs, which hold the memory, to their widest position (1).

4 Insert the memory unit horizontally into the slot (2).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Pas de commentaire

Ricoh AP505 Instructions d'exploitation Page 16