Ricoh Aficio C3000 Instructions d'exploitation télécharger pdf (Page 69)

Interface Settings

❖ LAN Type

When you have installed the IEEE 802.11b interface unit, select the method of

connection.

• Ethernet

• IEEE 802.11b

[LAN Type] is displayed when wireless LAN board is installed. If Ethernet and

IEEE 802.11b (wireless LAN) are both connected, the selected interface has

priority.

❖ Ping Command

Check the network connection with ping command using given IPv4 address.

If you fail to connect to the network, check the following, and then retry the

ping command.

• Make sure that “IPv4” in [Effective Protocol] is set to “Effective”.

• Check that the machine with assigned IPv4 address is connected to the net-

work.

• There is a possibility that same IPv4 address is used for the specified

equipment.

❖ Permit SNMPv3 Communication

Set the encrypted communication of SNMPv3.

• Encryption Only

• Encryption/Clear Text

If you select to [Encryption Only], you need to set an encryption password for

the machine.

❖ Permit SSL/TLS Communication

Set the encrypted communication of SSL/TLS.

• Ciphertext Only

• Ciphertext Priority

• Ciphertext/Clear Text

If you set to [Ciphertext Only], you need to install the SSL certificate for the ma-

chine.

❖ Host Name

Specify the host name.

Enter the host name using up to 63 characters.

❖ Machine Name

Specify the machine name.

Enter the machine name using up to 31 characters.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 315 316

Pas de commentaire

Ricoh Aficio C3000 Instructions d'exploitation Page 69