Ricoh Aficio C3000 Instructions d'exploitation télécharger pdf (Page 171)

Special Senders to Treat Differently

163

❒ Deleting a destination specified as a forward destination from the destina-

tion list causes the settings of the forward destination to be deleted, so they

must be registered again. When a destination is changed, a document is

transmitted to the new destination. If there is no destination of the speci-

fied type, you can set which destination to be used as an alternative desti-

nation. See “Parameter Settings” (switch 32, bit 0).

❒ After you perform step

, set “Forwarding” of “Reception Settings” to

“On”.

Reference

p.149 “Parameter Settings”

p.235 “Registering Folders”

Print 2 Sided

Specify when programming a Special Sender.

A Press [2 Sided Print per Sender].

B Press [On] or [Off], and then press [OK].

Note

❒ Selecting [Same as Basic Settings] will result in the same setting made for “2

Sided Print” of “Reception Settings”.

Memory Lock

Specify when programming a Special Sender.

A Press [Memory Lock Reception per Sender].

B Press [On] or [Off], and then press [OK].

Note

❒ Selecting [Same as Basic Settings] will result in the same setting made for

“Program Memory Lock ID” under “Administrator Tools”.

Paper Tray

Specify when programming a Special Sender.

A Press [Paper Tray per Sender].

B Select the tray you want to use, and then press [OK].

Note

❒ Selecting [Same as Basic Settings] will result in the same setting made for

“Paper Tray” of “Reception Settings”.

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 315 316

Pas de commentaire

Ricoh Aficio C3000 Instructions d'exploitation Page 171