Ricoh Remote Communication Gate S Guide d'installation télécharger pdf (Page 64)

Setting Description

SNMPv3 User name: Enter the user name of a device administrator

set in the device.

• Default: admin

Password: Enter the password for the user name set in the

device.

Confirm password: Enter the password again. This must be the

same as the password entered above.

Authentication

algorithm:

Select the encryption algorithm for SNMPv3.

•

[MD5]

Select when specifying a device using the

MD5 authentication algorithm.

• [SHA1]

Select when specifying a device using the

SHA1 authentication algorithm.

• Default: [MD5]

Encryption password: Enter the encryption password set in the

device.

Confirm encryption

password:

Re-enter the password to use for encryption.

This must be the same as the password entered

previously.

Context name: Enter the context name set in the device.

SNMP Trap SNMP Trap settings: Check this check box to automatically set the

device Trap.

• Default: [On]

3. After Installation

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 75 76

Pas de commentaire

Ricoh Remote Communication Gate S Guide d'installation Page 64