Ricoh 9100DN - Aficio SP B/W Laser Printer Instructions d'exploitation télécharger pdf (Page 37)

3. Connecting the Printer

Network Connection

The following explains the procedure for connecting the printer to the computer through the network.Prepare

the hub and other network devices before connecting the 10BASE-T or 100BASE-TX cable to the printer's

Ethernet port. Alternatively, the optional gigabit ethernet board, which supports 1000BASE-T, is available.

• Use shielded Ethernet cable. Unshielded cables create electromagnetic interference that could cause

malfunctions.

• The Ethernet cable is not supplied with this printer. Select your cable according to the network envi-

ronment.

1. Attach one ferrite core at the printer end of the Ethernet cable, and then attach the other

ferrite core about 10 cm (4 inches) (1) from this core making two loops as shown.

AQU130S

2. Connect the Ethernet cable to the Ethernet port.

AST012S

3. Connect the other end of the cable to the printer's network, such as a hub.

• Follow the same procedure for the gigabit Ethernet cable.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 167 168

Pas de commentaire

Ricoh 9100DN - Aficio SP B/W Laser Printer Instructions d'exploitation Page 37