Ricoh M096 Instructions d'exploitation télécharger pdf (Page 135)

[58] as the protocol number for the "Other" target protocol type, and then set [Negotiate security]

to [Permit].

38. Click [OK].

39. Click [Close].

The new IP security policy (IPsec settings) is specified.

40. Select the security policy that you have just created, right click on it, and then click

[Assign].

IPsec settings on the computer are enabled.

• To disable the computer's IPsec settings, select the security policy, right click, and then click [Un-

assign].

Enabling and Disabling IPsec Using the Control Panel

1. Press the [Menu] key.

2. Press the [

][ ] keys to select [Host Interface], and then press the [OK] key.

3. Press the [ ][ ] keys to select [Network Setting], and then press the [OK] key.

4. Press the [ ][ ] keys to select [IPsec], and then press the [OK] key.

5. Press the [ ][ ] keys to select [On] or [Off], and then press the [OK] key.

6. Press the [Menu] key to return to the initial screen.

• You can press the [Escape] key to exit to the previous level of the menu tree.

Transmission Using IPsec

133

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 147 148

Pas de commentaire

Ricoh M096 Instructions d'exploitation Page 135