Ricoh G112 Instructions d'exploitation télécharger pdf (Page 240)

Using a Printer Server

240

Use the same printer number created in the print server.

I A confirmation message appears. Click [OK].

J On the [NIB] menu, click [Exit].

Setting up using PCONSOLE

A Enter “PCONSOLE” from the command prompt.

F:> PCONSOLE

B Create a print queue.

When using the existing print queue, go to the procedure for creating a printer.

C From the [Available Options] menu, select [Print Queue Information], and then

press the {Enter} key.

D Press {Insert} key, and then enter a print queue name.

E Press {ESC} key to return to the [Available Options] menu.

F Set up the network connection to a printer.

G On the [Available Options] menu, click [Print Server Information], and then

press the {ENTER} key.

H To create a new print server, press the {INSERT} key, and then enter a

print server name.

For a currently defined print server, select a print server in the [Print Server] list.

Use the same printer name specified using NIB Setup Tool.

I From the [Print Server Information] menu, select [Print Server Configuration].

J From the [Print Server Configuration] menu, select [Printer Configuration].

K Select the printer indicated as [Not Installed].

Use the same printer number specified as the remote printer number using

NIB Setup Tool.

L To change the printer name, enter a new name.

A name “Printer x” is assigned to the printer. The “x” stands for the number of

the selected printer.

M As type, select [Remote Parallel, LPT1].

The IRQ, Buffer size, Starting form, and Queue service mode are automati-

cally configured.

N Press the {ESC} key, and then click [Yes] on the confirmation message.

1 2 ... 235 236 237 238 239 240 241 242 243 244 245 ... 298 299

Pas de commentaire

Ricoh G112 Instructions d'exploitation Page 240