Ricoh G112 Instructions d'exploitation Page 189

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 299
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 188
Monitoring and Configuring the Printer
189
Configuration
msh> hostname “interface_name” “printer_name”
Enter the printer name using up to 63 alphanumeric characters.
You cannot use a printer name starting with “RNP” or “rnp”.
The Ethernet interface and IEEE 802.11b interface will have the same
printer name.
ip1394 can be specified only when the IEEE 1394 interface is installed.
wlan can be specified only when the IEEE 802.11b interface is installed.
Initializing the printer name for each interface
msh>hostname interface_name clear name
ifconfig
Use the “ifconfig” command to configure TCP/IP (IP address, subnet mask,
broadcast address, default gateway address) for the printer.
View settings
msh> ifconfig
Configuration
msh> ifconfig “interface_name” “parameter” “address”
If you did not enter an interface name, it is automatically set to the Ethernet
interface.
ip1394 can be specified only when the IEEE 1394 interface is installed.
wlan can be specified only when the IEEE 802.11b interface is installed.
Netmask configuration
msh> ifconfig “interface_name” netmask “address”
Broadcast address configuration
msh> ifconfig “interface_name” broadcast “address”
Interface name Interface configured
ether Ethernet interface
ip1394 IEEE 1394 interface
wlan IEEE 802.11b interface
Interface name Interface configured
ether Ethernet Interface
ip1394 IEEE 1394 Interface
wlan IEEE 802.11b Interface
Vue de la page 188
1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 298 299

Commentaires sur ces manuels

Pas de commentaire