Ricoh Network Data Protection Unit Type C Manuel d'utilisateur télécharger pdf (Page 83)

Installing Options

D Fully insert the 1284 interface board.

Confirm that the 1284 interface board is firmly connected to the controller

board.

E Tighten the two screws to secure the 1284 interface board.

❒ Use the supplied adaptor to make the connection with the computer.

❒ After finishing installation, check the 1284 interface board is installed prop-

erly: print the configuration page from the “List/Test Print” menu. If it is in-

stalled properly, you will see “Parallel Interface” for “Controller Option”.

❒ If the 1284 interface board is not installed properly, reinstall it from the start

of the procedure. If you cannot install it properly even after attempting re-

installation, contact your sales or service representative.

For details about printing the configuration page, see p.40 “Test Printing”.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 107 108

Pas de commentaire

Ricoh Network Data Protection Unit Type C Manuel d'utilisateur Page 83