Ricoh Aficio MP MP C3500/C4500 Manuel d'utilisateur télécharger pdf (Page 22)

C Set the paper size using the printer driver or the control panel.

The following procedures are not required if you select [Driver / Command]

from [Bypass Tray Setting Priority] in [System] of [Printer Features]. In that case,

set the paper size using the printer driver.

Note

❒ Paper sizes that can be loaded onto the bypass tray are 90 - 305 mm (3.6 -

12 in.) vertical, and 148 - 600 mm (5.9 - 23.7 in.) horizontal.

❒

When loading OHP transparencies or thick paper, set paper size and paper type.

❒ The number of sheets that can be loaded in the bypass tray depends on the

paper type.

Reference

When loading letterhead paper, pay attention to its orientation. See Gener-

al Settings Guide.

For printer driver settings, see the printer driver Help.

Setting the Paper Size Using the Control Panel

Follow the procedure below to set the machine using the control panel when

loading standard size paper onto the bypass tray.

Important

❒ The following procedures are not required if you select [Driver / Command]

from [Bypass Tray Setting Priority] in [System] of [Printer Features] (see “Printer

Features”, General Settings Guide). In that case, set the paper size using the

printer driver.

❒ Under [Printer Features], [System], if you set [Bypass Tray Setting Priority] to [Driv-

er / Command] , paper size settings made on the printer driver must match

those made on the control panel. If they do not match, an error message ap-

pears and printing stops if [Printer Features], [System], [Auto Continue] is not set.

For details about [Printer Features] settings, see General Settings Guide.

A Press the {User Tools/Counter} key on the control panel.

B Press [System Settings].

C Press the [Tray Paper Settings] tab.

D Press [Printer Bypass Paper Size].

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 165 166

Pas de commentaire

Ricoh Aficio MP MP C3500/C4500 Manuel d'utilisateur Page 22