Ricoh Aficio IS 2325 Manuel d'utilisateur télécharger pdf (Page 90)

Troubleshooting When Using the DDST Unit

The Scanner Function

When Scanning Is Not Done As Expected

This section describes causes and remedies when scan results are not as expected.

Problem Cause Solution

The scanned image is dirty. The exposure glass, scanning

glass, exposure glass cover, or

ARDF is dirty.

Clean these parts. See p.113

“Maintaining Your Machine”.

The image is distorted or out

of position.

The original was moved dur-

ing scanning.

Do not move the original dur-

ing scanning.

The image is distorted or out

of position.

The original was not pressed

flat against the exposure glass.

Make sure that the original is

pressed flat against the expo-

sure glass.

The scanned image is upside

down.

The original was placed up-

side down.

Place the original in the cor-

rect orientation. See “Placing

Originals”, Printer/Scanner

Reference.

No image results from scanning.

The original was placed with

the front and back reversed.

When the original is placed

directly on the exposure glass,

the side to be scanned must

face down. When the original

is fed via the ARDF, the side to

be scanned must face up. See

“Placing Originals”, Print-

er/Scanner Reference.

The scanned image contains

white spaces.

If you scan originals using

functions other than the net-

work TWAIN scanner func-

tion, certain paper size and

resolution settings may pro-

duce scanned images that are

larger than the specified size

because of margins being add-

ed to the sides.

Scanning at a higher resolu-

tion may reduce the margins.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 125 126

Commentaires sur ces manuels

Pas de commentaire

Ricoh Aficio IS 2325 Manuel d'utilisateur Page 90

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Ricoh Aficio IS 2325