Ricoh Aficio CL5000 Manuel de service télécharger pdf (Page 303)

500-Sheet

Finisher

G314

DETAILED SECTION DESCRIPTIONS

SM 15 G314

Output Tray Up/Down Mechanism

G314D105.WMF

[C]

[A]

[D]

[E]

[B]

Overview

The output tray motor [A] lifts/lowers the tray if the stack height is not at the target

position.

Gears [B] and [C] keep the angle of the tray constant at any tray position.

Output Tray Downward Movement

The top of the paper stack is checked after every page (or set of pages) has been

fed out. If the top of the stack is higher than the target level, the output tray motor

moves the tray down.

When the stack near-limit sensor [D] detects the actuator on gear [C], a stack near-

limit signal is transferred to the main frame. The tray cannot move any lower. The

next time the top of the stack height is above the target level, printing stops.

Output Tray Upward Movement

If paper is removed from the stack, the top of the stack will be lower than the target

level, and the output tray motor moves the tray up.

When the tray upper limit sensor [E] detects the actuator on gear [B], the tray

cannot be moved up any more, so the motor stops.

CÓPIA NÃO CONTROLADA

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 318 319

Pas de commentaire

Ricoh Aficio CL5000 Manuel de service Page 303