Ricoh GX7000 Guide de l'utilisateur télécharger pdf (Page 172)

If Test Print Fails

This section explains how to troubleshoot Test Print problems.

The power cord or USB cable or Ethernet cable is

not properly connected.

Check that the power cord and USB cable, Ethernet

cable are properly connected.

The port connection is not properly set. 1. On the [Start] menu, point to [Settings], and

then click [Printers].

2. Click the icon of the printer, and then click

[Properties] on the [File] menu.

3. Click the [Details] tab (Windows 2000/XP/

Vista, Windows Server 2003, Windows NT

4.0: the [Ports] tab) , and then check the

printer port.

• Select USB or network printer in the list when

the selected port connection is something

other than USB or network printer.

• To connect via USB when USB does not

appear in the list, you must re-install the printer

driver. See p.168 "USB Connection is not

Automatically Detected".

Ink feed is incomplete. Ink begins automatically feeding into the print-

heads when the power of the printer is first turned

on or when a cartridge is replaced.

Wait until ink feed is complete at which point the

[Power] key stops blinking and remains lit.

The printer is offline. Check if the printer’s on-line indicator is lit. If the

printer is offline, press the [Online] key on the

control panel to switch the printer to the on-line

mode.

A printer error has occurred. Use the control panel to check if a printer error has

occurred. If it has, correct the error, and then

perform the print again.

If you cannot solve the problem, contact sales or service representative.

• If the Status monitor displays an error message, see p.212 "Status Monitor Errors".

6. Troubleshooting

170

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 271 272

Pas de commentaire

Ricoh GX7000 Guide de l'utilisateur Page 172