Ricoh FW780 Instructions d'exploitation télécharger pdf (Page 87)

Where to Put Your Copier

Your copier should be installed by a qualified technician. If you need to trans-

port your copier to a distant location, call your service center before the move.

You can of course move your copier around your office without calling the serv-

ice center. If you do, remember that the temperature, humidity, and cleanliness

of the area around the copier may affect its performance. Choose the new loca-

tion with care and follow the guidelines below.

Machine Environment

Your machine's location should be carefully chosen because environmental con-

ditions greatly affect its performance.

Optimal Environmental Conditions

CAUTION:

• Temperature: 50° to 86°F (15° to 30°C)

• Humidity: 20 to 80% RH

• To avoid possible ozone build-up make sure to install this copier in a large

well ventilated room ensuring an air turnover of at least 1000 ft

/hour/per-

son (30 m

). When you use this machine for a long time in a confined space

without good ventilation, you may notice an odd smell. To keep the work-

space comfortable, we recommend that you keep it well ventilated.

• Set your copier on a strong and level base. The copier must be level within less

than a quarter of an inch (5 mm) left to right and less than half an inch (10 mm)

front to rear.

Environments to Avoid

• Locations exposed to direct sunlight or strong light (more than 1500 lux)

•Dusty areas

• Areas with corrosive gasses

• Keep the machine away from humidity and dust. A fire or an elec-

tric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it top-

ples over, it could cause injury.

• If you use the machine in a confined space, make sure there is a

continuous air turnover.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 96 97

Pas de commentaire

Ricoh FW780 Instructions d'exploitation Page 87