Ricoh FW780 Instructions d'exploitation télécharger pdf (Page 23)

2. Copying

Basic Copying (Copying to sheets)

Use bypass table or roll feeder to copy onto paper.

Note

❒ For acceptable types of original and paper, ⇒ P.6 “Recommended Originals”⇒

P.8 “Recommended Paper”.

❒ If you use bypass teble, place one sheet of paper and never insert more than

one sheet of paper.

❒ If the copy paper is curled, place it with the curl facing downwards.

❒ When you set A0 size (36"×48") paper, to make sure the ends do not touch the

floor and get dirty, lay a wide piece of paper or some other covering on the

floor.

❒ When setting an original or paper longer than 1,200mm (48”), pull down the

Original stopper (option, a part of the copy stacker) and put the edge of your

original or paper on.

❒ Do not use paper which is cut obliquely. When the difference between the

right side and the left side of the paper is more than 5mm(1/5”), creasing or

a paper jam might occur.

❒ You cannot copy to both sides of the paper at the same time.

❒ The machine needs about 3 minutes to warm up after being turned on before

copies can be made. The machine is warming up when the wait indicator is

lit, but you can still edit settings, insert copy paper or insert your original.

❒ You can set either the paper or an original (from bypass tray or roll feeder)

first. When you have set both of them, the copier starts copying automatically.

If you want to feed manually, manual feed mode is available. For details

about manual feed mode, ⇒ P.16 “Manual Feed Mode”

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 96 97

Pas de commentaire

Ricoh FW780 Instructions d'exploitation Page 23