Ricoh RDC-6000 Spécifications télécharger pdf (Page 115)

113

Appendix

Dead battery

Auto power-off activated

Obstruction between the remote

control unit and camera sensor

Dirty remote control transmitter or

camera sensor

Dead remote control batteries

Area captured by autofocus field

and the surrounding area have

contrasting light levels or the

entire subject is dark.

Phenomenon occurring with

pictures of bright subjects, known

as the smudge phenomenon

Display shut off Recharge battery.

Slide power on again.

Remove the obstruction. (Sensor is on

the left side of the lens.)

Clean with a soft dry cloth.

Replace CR2032 lithium batteries.

There is no malfunction.

There is no malfunction. Never shoot the

Sun, etc.

Remote control

unit will not

work

LCD monitor

brightness

changes during

autofocus

operation

Vertical lines

appear on

image

Wrong type of SmartMedia

memory card

SmartMedia memory card

incorrectly oriented

Dead battery

Camera malfunction

Date and time setting is incorrect

Battery removed

Camera not set to erase mode

Write protect pad on SmartMedia

memory card

File protected

Power switch off or auto power-

off activated.

Batteries have been removed

Auto power-off setting is disabled

Camera powered by AC adapter

(auto power-off is automatically

disabled when powered by an AC

adapter)

The television system setting is

incorrect.

SmartMedia

memory card

will not fit into

slot

Use a SmartMedia memory card specified

for the camera.

Insert the SmartMedia memory card the

correct way.

Recharge battery.

Slide the power off and on once. Turn

the mode dial to [

] or [ ]. If the

problem persists, (1) reset the camera by

sliding the power switch after removing

the main batteries, and (2) reinstall the

batteries and try to operate the camera

again.

Reset the date and time.

The date setting is reset if the battery has

been removed for about 3 minutes or

longer. Set the date again.

Turn the mode dial to [

].

Remove pad from SmartMedia memory

card.

Use the play menu to reset the file’s

protection setting.

Slide power on and retry.

Reset keep setting.

Enable setting.

–

Select the correct television system.

■ Miscellaneous

Camera will not

operate even

when buttons

and switches

are

manipulated

Date and time

are wrong

Date and time

were set but

disappeared

File won’t erase

or SmartMedia

memory card

won’t format

Mode settings

have changed

Auto power-off

will not activate

Problem Cause Solution Page

Problem Cause Solution Page

25

41

–

–

–

–

–

30

30

25

–

33

34

86

29

80

41

94

95

–

97

No image on

the TV screen

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 124 125

Commentaires sur ces manuels

Pas de commentaire