Ricoh CLP22 Guide d'installation télécharger pdf (Page 105)

100

101

Configuration

N Press the {U} or {T} key to display [DHCP], and then press the {# Enter}

key.

O Press the {U} or {T} key to display [On], and then press the {# Enter} key.

❒ “p ” shows the current setting.

❒ After about two seconds, the display returns to the network setup menu.

P If you use NetWare, select the frame type for NetWare.

Select one of the items below if necessary.

• Auto Select (Default)

• Ethernet II

• Ethernet 802.2

• Ethernet 802.3

• Ethernet SNAP

❒ Usually, use the default setting (“Auto Select”). When you first select [Auto

Select], the frame type detected by the printer is adopted. If your network

can use more than two frame types, the printer may fail to select the correct

frame type if [Auto Select] is selected. In this case, select the appropriate

frame type.

Q Press the {U} or {T} key to display [Frame Type (NW)], and then press the

{# Enter} key.

The current setting appears on the display.

R Press the {U} or {T} key to display the frame type you want to use, and

then press the {# Enter} key.

Network Setup:

DHCP

DHCP:

*On

Network Setup:

Frame Type (NW)

Frame Type (NW):

*Auto Select

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 535 536

Commentaires sur ces manuels

Pas de commentaire

Ricoh CLP22 Guide d'installation Page 105

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimer et scanner Ricoh CLP22