Ricoh Printer Reference Manuel d'utilisateur télécharger pdf (Page 134)

Direct Printing from a Digital Camera (PictBridge)

126

PictBridge Printing

Follow the procedure below to start PictBridge printing on this machine.

Important

❒ Do not disconnect the USB cable while data is being sent. If you do, printing

will fail.

❒ The USB host interface board is supplied with a USB cable and a hook onto

which you can roll up and hang the cable.

A Attach the hook on the back of the machine near the USB connection slot.

Attach the hook where it will not interfere with machine operation and access.

B Check the machine and the digital camera are both switched on.

C Connect a USB cable between the optional USB host interface board in-

stalled on the machine and the digital camera.

The Data In indicator on the machine blinks for several seconds and “Pct-

Brdg” is displayed on the machine. This indicates the machine recognizes the

digital camera as a PictBridge device.

D Secure the USB cable using the hook.

E On your digital camera, select the images you want to print, and specify the

printing conditions.

F The machine receives settings from the digital camera and starts printing.

AMT016S

AMT017S

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 161 162

Pas de commentaire

Ricoh Printer Reference Manuel d'utilisateur Page 134