Ricoh Aficio SP 4110N Manuel d'utilisateur télécharger pdf (Page 65)

9. Set [Trans. Speed] in the same way.

The factory default is [Auto]. If you need to change the transmitting speed depending on environment

you are using, select the appropriate transmitting speed.

10. Print a configuration page to confirm the settings made.

• "Printing the Test Page", Quick Installation Guide.

Setting SSID

If [Infrastructure] or [802.11 Ad hoc] is selected for [Comm. Mode], set SSID to use for transmission. Consult

your network administrator for the SSID to use.

1. In the [IEEE 802.11b] menu, press the [ ] or [ ] key to display [SSID], and then press the

[ Enter] key.

If an SSID has been set, you can check the SSID setting.

2. Press the [ ] or [ ] key to display [Enter ID], and then press the [ Enter] key.

3. Press the [ ] or [ ] key to enter characters, and then press the [ Enter] key.

The number of characters you have entered is displayed on the top right of the screen.

The characters that can be used are ASCII 0x20-0x7e (32 bytes), 16 digits.

IEEE 802.11b (Wireless LAN) Configuration

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 203 204

Pas de commentaire

Ricoh Aficio SP 4110N Manuel d'utilisateur Page 65